Free tool · Roofing
A roofing quote calculator that measures in squares
Roofs aren't priced by the room. This one turns the footprint, the pitch and the roof's shape into squares and bundles, then adds tear-off, height and flashings at your rates. Try it as a homeowner would on your site.
Chimneys
Skylights
Sample rates: put in your own
These are examples, not market prices. On your website the tool runs on your rates, before HST.
/ square
/ square
/ square
/ square
each
each
A new roof would likely cost
$12,200 – $15,000
(sample rates, before HST)
- Roof area
- 1,789
- Squares
- 20.0
- Bundles
- 60
- 20 squares installed (2 storeys: +10%)
- $11,000
- Tear off 1 old layer
- $2,000
- Chimney flashing × 1
- $600
Plus or minus 10%: a measured roof is close, but the deck under the shingles is only seen once they're off.
How it works it out
- 1The footprint times the pitch factor gives the real roof area: a 6/12 roof is about 12% bigger than its footprint, a 12/12 roof about 41%.
- 2Waste is added for the roof's shape: 10% for a simple gable, 15% for a hip roof, 20% for one cut up by dormers and valleys.
- 3That area in squares (100 sq ft each), rounded up to the bundle, times your installed rate gives the main line. Two storeys add 10%, three add 20%.
- 4Tear-off per old layer, and flashing for each chimney and skylight, are added at your rates.
- 5A very steep roof three storeys up, or two old layers, is flagged for a person to check.
Why it matters
- Homeowners can answer these questions
- How big is the house, how steep is the roof, how many chimneys. They can't tell you how many squares, so the tool works that out.
- The flags protect your margin
- Rot under two layers and steep-roof staging are where estimates go wrong. The tool says so up front instead of promising a number it can't keep.
- Leads arrive measured
- Squares, pitch, material and the range come with the enquiry, so you know if the job is worth the drive before you go.